20/11/2026 NEWS / PRESS
Choosing the right stainless steel grade:
316L, 316LVM, 17-4PH, 1.4057…Corrosion, mechanical strength, fatigue, hardness: choosing a stainless steel grade is about more than simply selecting a grade.
316L, 316LVM, 17-4PH, 1.4057… They are all stainless steels, but they do not meet the same industrial requirements.
Understanding their differences to select the right material for each application.
Austenitic stainless steels (304, 316L…)
Stable structure at room temperature thanks to nickel.
Non-magnetic in the annealed condition, highly ductile and very corrosion-resistant. Heat treatment does not harden them: only cold working does.
Examples: piping, process tanks, fasteners and instrumentation in corrosive environments.
Precipitation-hardening martensitic steels, PH type (17-4PH, 15-5PH…)
The component is machined in the annealed condition, then ageing causes fine intermetallic compounds to precipitate, hardening the metal with very little distortion. Final dimensions remain controlled.
The result: high mechanical strength and good corrosion resistance.
Examples: shafts and axles, aircraft structural fittings, valves and pumps, precision surgical instrument components.
Remelted austenitic steels, including implantable grades (316LVM, M30NW…)
Same family, with much better inclusion cleanliness and homogeneity thanks to ESR remelting.
The grain is fine and fatigue resistance is high. Implantable grades also feature a composition governed by medical standards (ISO 5832, ASTM F138).
Examples: bone fixation screws and plates, thin components subjected to high fatigue loads.
Quenched and tempered martensitic steels, QT type (1.4021, 1.4028, 1.4057…)
Quenching, followed by tempering, allows the balance between hardness and toughness to be adjusted.
They are magnetic and can achieve high hardness, but offer lower corrosion resistance than austenitic steels.
Examples: pump shafts, valve stems, blades and cutting tools, high-strength fasteners.
Conclusion: choose based on your application
The right material choice depends above all on the requirements of your component and its environment.